Page 4
1 Product Description
This precision bench-top/portable multimeter has dual measurement capability and a dual
display which can show either two independent measurements, a measurement together with
its range value, or a measurement with one of the many programmable functions available.
The key features are:
x Operation from AC line or built-in rechargeable batteries.
x 0.02% basic accuracy, 120,000 counts.
x Manual or Auto-ranging.
x DC and AC Volts, DC and AC current, Resistance, Capacitance, Frequency, and
Temperature measurement; Continuity and Diode checks.
x True RMS AC and AC+DC measurement.
x Two or Four wire selectable ohms measurement.
x Display nulling and Ohms null.
x Selectable measurement speed.
x Touch hold mode - holds onto a stable reading until updated.
x 500 point data logger with timer.
x Temperature measurement for PT100 or PT1000 sensors.
x Measurement post-processing to give:
dB and power measurement with settable reference impedances
percentage deviation from a user-entered reference
linear scaling with offset
limits comparison for go/no go testing
automatic storage of minimum and maximum readings.
x Remote control via USB interface (1908)
x Remote control via USB, RS232, GPIB and LAN (LXI) interfaces (1908P)
x External input/output remote triggering.
x 1908-PC Link software providing:
Remote control of main functions
Logging function with graphical & tabular displays
Logged data can be exported to a CSV file
x Closed case calibration.
x Fully compliant with EN61010-1, EN61010-2-030 & EN61010-2-033 Safety, and
EN61326-1 EMC standards.
To Next Page
Loading...
Need help?
General
