Need help?Do you have a question about the Aim-TTI EX354RD and is the answer not in the manual?
General| Output Voltage | 0 - 35V |
|---|---|
| Output Current | 0 - 4A |
| Power Rating | 140W |
| Number of Outputs | 1 |
| Remote Sense | Yes |
| Voltage Resolution | 10 mV |
| Current Resolution | 1 mA |
| Interfaces | USB, RS232 |
| Operating Temperature | 0 to 40°C |
| Storage Temperature | -20°C to +70°C |
Details the specifications of the voltage and current meters used for the main outputs.
Specifies the voltage, accuracy, and current limit for the auxiliary output.
Covers AC input, power consumption, operating range, environmental, and safety standards.
Describes powering on the unit and how to preset voltage and current limits.
Explains the constant voltage and constant current operational modes.
Details intrinsic protection features and the remote sensing facility for accurate load regulation.
Covers setting the output voltage and the current limit for the auxiliary output.
Details the protection mechanisms for the auxiliary output against overvoltage and reverse current.
Explains how to connect loads and configure outputs in series or parallel.
Emphasizes the importance of maintaining adequate ventilation for cooling and safety.
Provides instructions and specifications for replacing the unit's fuse.
Details safe methods for cleaning the instrument to avoid damage and electrical shock.
To Next Page
