CHAPTER 2
16
SmartyCam HD battery charge
SmartyCam HD is supplied with
a 1040mAh 3.7 Volt internal rechargeable
lithium battery.
It can be charged using either the cable
connected to the five-pin connector or the
USB battery charger inserted into the USB
port, as shown in the following image:
When the battery is fully charged, the LED
is GREEN
The battery charge status is shown on the
display.
When the battery is charging by USB cable,
an internal LED becomes RED
SMARTYCAM HD MANUALE ENG _Layout 1 24/07/13 20.41 Pagina 17
To Next Page
Loading...
