Need help?Do you have a question about the Aim SmartyCam HD and is the answer not in the manual?
Defines SmartyCam HD and its primary function as a video recorder for motorsports.
Covers turning the device on/off and battery management when not connected to external power.
Explains the process of inserting and removing the SD card for recording.
Describes the buttons and the LCD display interface for operating the camera.
Details the procedures for charging the internal rechargeable lithium battery.
Explains various methods for powering the SmartyCam HD on and off, including automatic shutdown.
Describes how the device operates automatically when connected to an external 12V power source.
Outlines the three methods for starting and stopping video recording manually or automatically.
Details the process for manually starting and stopping video recording.
Covers automatic recording triggers based on acceleration or logger signals, and standalone modes.
Introduces SmartyManager2 software for configuring the SmartyCam HD, including its capabilities.
Guides users through the process of creating new overlay configurations.
Explains how to select, resize, and position track maps within a configuration.
Details how to add, modify, and delete custom logos for the video overlay.
Explains methods for transmitting configurations to the SmartyCam HD via PC or SD card.
Defines SmartyCam HD and its primary function as a video recorder for motorsports.
Covers turning the device on/off and battery management when not connected to external power.
Explains the process of inserting and removing the SD card for recording.
Describes the buttons and the LCD display interface for operating the camera.
Details the procedures for charging the internal rechargeable lithium battery.
Explains various methods for powering the SmartyCam HD on and off, including automatic shutdown.
Describes how the device operates automatically when connected to an external 12V power source.
Outlines the three methods for starting and stopping video recording manually or automatically.
Details the process for manually starting and stopping video recording.
Covers automatic recording triggers based on acceleration or logger signals, and standalone modes.
Introduces SmartyManager2 software for configuring the SmartyCam HD, including its capabilities.
Guides users through the process of creating new overlay configurations.
Explains how to select, resize, and position track maps within a configuration.
Details how to add, modify, and delete custom logos for the video overlay.
Explains methods for transmitting configurations to the SmartyCam HD via PC or SD card.
General| Frame Rate | 30 fps |
|---|---|
| Lens Angle | 120° |
| GPS | Yes |
| G-Sensor | Yes |
| Loop Recording | Yes |
| Resolution | 1280x720 |
| Video Format | H.264 |
| Storage | SD Card |
| External Power | 7-15V |
| Data Inputs | CAN |
| Power Supply | 7-15 V |
To Next Page
