Overview
When does the Pedal Assist activate?
Pedal Assist (PAS) functions only when you are pedaling. If
you do not pedal, the PAS will not activate. The motor output
always depends on your pedaling and the PAS level you have
set.
PAS automatically switches off at the maximum speed set for
your Aipas eBike (up to 28 mph). When the speed falls below the
maximum set speed, PAS automatically becomes available again.
You can also use your Aipas eBike as a normal bicycle without
assistance at any time, either by switching the Cockpit System
power button OFF, or by setting PAS to 0. If the battery needs to
be charged, PAS will not function.
When the bicycle has not been used for 10 consecutive minutes,
the display will automatically shutdown. The PAS and throttle
features
will no longer work when the display is OFF.
Pedal Assist and Shifting Gears
You should shift gears on your Aipas eBike in the same way
you would shift with a normal bicycle.
By selecting the proper gear, you can increase your speed and
range while applying the same amount of force.
You should test the range of your Aipas eBike under different
conditions and terrains before planning longer and more
demanding trips. Refer to the Range Estimates section below to
learn about the factors to consider when planning longer
rides.
To Next Page
Loading...