WARNING!
To prevent serious injury or death:
• Do not allow yourself to be distracted by the display. If you
do not concentrate on the traffic around you, you risk being
involved in a crash. If you want to change any settings other
than the PAS level, always stop before changing the settings
or display.
• Set the display brightness such that you can adequately
see important information like speed or warning
symbols. Display brightness that is incorrectly set can
result in dangerous
situations.
• The electrical components on the bicycle are not
waterproof. The electrical components on the bike have an
IP rating of 65.
• Check the display and plug. If damage is detected, do not
use the display. A damaged display or cables or plugs
increase the risk of a fire, explosion and personal injury.
• Do not disassemble the display. There are no user
serviceable parts inside the display. Incorrect reassembly
or damage may result in fire or explosion.
To Next Page
Loading...