EasyManua.ls Logo

AIPAS A6 - Riding and Operation; Walk Mode Operation Guide; Cruise Control Activation

Default Icon
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. Press and hold the plus (+) and the minus ( -) buttons
on the control pad to exit Settings Menu.
5. Power bicycle OFF by holding the button to save the settings.
Walk Mode
Electric bicycles are heavier than bicycles. To make walking the
bicycle easier, your Aipas A6 is equipped with Walk Mode,
which can be toggled on or off in the settings menu. Walk
Mode may be subject to local regulations. Check your local
regulations to determine if allowed.
To activate:
Hold down the minus (-) button on the display control pad
and the motor will engage at a speed similar to a slow walk.
NOTE: When Walk Mode is active, “Walking will appear on the
display.
ALWAYS keep wheels in contact with the ground when
using Walk Mode.
To deactivate:
Pull either brake lever to disengage Walk Mode OR press and
hold the minus (-) button on the display control pad.
Cruise Control
Cruise control on your Aipas A6 works similarly to cruise
control on a car. The bike will try to maintain a speed based on
the position of the throttle when cruise control was activated. For
example, if the throttle is twisted all the way from its resting
position (to a position that would normally maint ain 20 mph)
and the minus button is held, cruise control w ill be activated
and set at 20 mph. Even if the bike is currently going slower
than 20 mph, the bike will try to
WWW.AIPASBIKE.COM
40