To Charge:
1. Plug the cable from the charger into the port on th e side
of the battery pack.
2. Plug the charger power cable into an electrical mains wall
socket. Note: Use only the supplied input connection: standard AC
power
cord when connecting to the household electrical supply.
Note: The charging process is only possible when the
temperature of your Aipas eBike battery is within the
permitted charging temperature range.
After charging is complete and the light on the charger is green,
disconnect the cable from the battery port and power cord from
wall socket. If you have charged the battery in the bicycle
frame, carefully insert the rubber plug after charging, so that no
dirt or water can
enter the battery port.
To Next Page
Loading...