Aiphone GF-1MD User Manual

Safety warnings regarding electrical hazards, modification, power sources, water exposure, and proper wiring.

Precautions against hearing damage, electrical shock, improper mounting, and environmental conditions.

Guidelines for indoor use, power failure operation, radio frequency interference, and wire separation.

Lists various components for the entrance station, including frames, panels, modules, and back boxes.

Details video-related components such as camera modules and video control units.

Lists control units, power supplies, and junction units for the system.

Describes the apartment stations, including models GF-1D and GF-1MD.

Illustrates various combinations of panels for entrance stations.

Describes the assembly of front frames, panels, and modules onto a bracket.

Provides details and dimensions for mounting back boxes for entrance stations.

Shows optional accessories for entrance stations like rain hoods and mounting boxes.

Step-by-step guide for connecting modules using plug-in connectors.

Instructions for mounting and resetting the GF-BC and GF-VBC control units.

Mounting instructions for the GF-1D apartment station.

Mounting instructions for the GF-1MD apartment station.

Wiring diagrams and settings for audio communication systems, including DIP switch configuration.

Wiring schematics for apartment stations, doorbell buttons, and control units.

Wiring diagrams for audio/video systems involving various modules.

Wiring configurations for apartment stations using GF-4Z junction unit or monitor-to-monitor setup.

First step for system setup involving power switch and GF-DA/A PROGRAM switch.

Procedure for establishing communication and setting up the first apartment station.

Guides to program subsequent apartment stations sequentially.

Instructions for clearing and resetting incorrect system configurations.

Instructions for adjusting the camera angle on the GF-VA module.

Guidance on filling out nameplates and removing protective films from modules.

Steps for mounting brackets and panels using the provided mounting gauge.

Guidelines on temperature, mounting location, and rain hood usage.

Instructions for post-replacement setup, system operations, and cleaning procedures.

Technical details on power source, wiring, and communication methods.

Physical dimensions, weights, and system capacity details.

Details on door release terminals, voltage, and current ratings.