Do you have a question about the Aiphone GH Series and is the answer not in the manual?
Installation | Surface mount |
---|---|
Housing Material | ABS plastic |
System Type | Video Intercom System |
Communication | Hands-free |
Wiring | 2-wire |
Camera | Built-in camera module |
Door Release | Supported |
Operating Voltage | 24V DC |
Operating Temperature | -10°C to +60°C |
Weather Resistance | IP54 |
Critical safety warnings regarding death or serious injury.
Safety warnings about injury to people or damage to property.
General guidelines for safe and proper operation of the unit.
Details the components and wiring of the standard system configuration.
Specifies the maximum allowed distances for various wiring connections.
Lists and illustrates various modules for the entrance station.
Shows different combinations of entrance station modules.
Lists and illustrates bus control units and related accessories.
Details the different types of residential station units available.
Details the security guard station unit and its features.
Provides instructions for mounting the entrance station back box and modules.
Details the process for connecting modules for the entrance station.
Illustrates module interconnections for the entrance station.
Instructions for mounting bus control units and power supplies.
Instructions for mounting residential station units.
Instructions for installing the optional handset.
Details desk-top mounting for the security guard station.
Details wall-mounting procedures for the security guard station.
Diagram illustrating the wiring for the standard system configuration.
Explains the wiring details for the standard system, including entrance stations.
Details the station-to-station wiring method for the standard system.
Details the homerun wiring method for the standard system.
Diagram and description of the expanded system wiring.
Explains the use and connection of the option connector.
Details the wiring for connecting an external signaling relay.
Explains how to set up names for digital scrolling entrance stations.
Explains the setup for direct selection entrance stations.
Details the naming conventions for the GH-1MD residential station.
Details the naming conventions for GH-1AD and GH-1KD stations.
Explains how to set up names and information on the security guard station.
Instructions on how to adjust the camera angle for optimal viewing.
Guide to entering resident names and addresses on the station.
Using the mounting gauge for precise panel adjustments.
Step-by-step guide to configuring the entrance station system.
Detailed programming procedures for the GH-NS unit.
Explains how to access and use the program mode for GH-NS.
Detailed procedures for programming the GH-MK security guard station.
Explains how to access and use the program mode for GH-MK.
Instructions on how to make calls to residential stations from the entrance.
Guide to responding to calls received at the residential station.
How to handle calls originating from a doorbell button.
Operation of the door release function.
How to activate the entrance light.
How to call the security guard station from a residential unit.
How to use the automatic entry or doctor call function.
Procedures for using the emergency alarm function.
How to monitor activity at entrance stations.
Operation of the service button for external unit control.
Guide to responding to calls from entrance stations.
Guide to responding to calls from residential stations.
Instructions on calling entrance stations from security guard station.
Instructions on calling residential stations from security guard station.
How to call another security guard station.
Procedures for making and handling emergency calls.
How to set and use the reception mode for call forwarding.
How calls from doorbell buttons are handled.
How to view and manage missed calls.