Need help?Do you have a question about the Aiphone GH-1KD and is the answer not in the manual?
General| Type | Video Intercom System |
|---|---|
| Camera | Yes |
| Connectivity | Wired |
| Door Release | Yes |
| Mounting | Surface Mount |
| Housing Material | Plastic |
| Wireless Operation | No |
| Screen Size | 7 inches |
| Audio | Full-duplex |
| Power Source | AC Adapter |
| Current Consumption | Approx. 300mA |
| Operating Temperature | 14°F to 122°F (-10°C to 50°C) |
| Number of Stations | 1 |
| Wiring | 4-wire |
Crucial safety guidelines to prevent injury or death from unit misuse.
General guidelines for system operation, placement, and environmental conditions.
Details on standard system setup, components, and capacity.
Diagram illustrating expanded system wiring, layout, and capacity.
Specifies maximum cable lengths for various connections based on wire diameter.
Lists and illustrates various entrance station modules and accessories.
Shows typical entrance station configurations with different functions.
Lists and illustrates control units, power supplies, and accessories.
Lists and illustrates different models of residential stations.
Lists and illustrates the security guard station model.
Step-by-step guide for installing the entrance station back box and modules.
Detailed steps for connecting modules and running cables for entrance stations.
Wiring interconnection examples for entrance station modules.
Instructions for mounting bus control units and power supplies.
Guide for installing residential station units onto wall or box.
Procedure for attaching an optional handset to the residential station.
Instructions for desk-top mounting the security guard station using a stand.
Instructions for wall-mounting the security guard station.
Illustrates wiring for standard system configurations.
Specific wiring details for standard system configuration 1.
Details wiring between stations in a system.
Explains homerun wiring methods for system setup.
Diagrams for expanded system wiring configurations.
Instructions for connecting external signaling relays.
Identifies components of entrance stations: GH-VA, GH-DA/A, GH-NS, GH-10K.
Identifies components of GH-1AD and GH-1KD residential stations.
Identifies components of the GH-1MD residential station.
Identifies components of the GH-MK security guard station.
Guide on positioning the camera for optimal view.
Process for labeling stations with resident information.
Using a gauge for precise panel alignment during installation.
Steps for configuring system parameters and initial programming.
Detailed instructions for programming GH-NS units via PC or directly.
Walkthrough of the GH-NS program mode menus and options.
Instructions for programming GH-MK units via PC or directly.
Guide to the GH-MK program mode menus and functions.
How to initiate calls to residential units via name or room number.
Procedure for calling the security guard station from an entrance unit.
How to activate the door release mechanism from the entrance station.
How to respond to doorbell calls at the entrance station.
How to activate the entrance light remotely.
Function for automatic door unlocking for visitors.
Procedures for emergency alarms and monitoring entrance stations.
How to answer calls from entrance and security guard stations.
Responding to doorbell calls and controlling the entrance light.
How to enable and use the automatic entry feature.
Procedures for handling emergency alarms and monitoring entrance stations.
How to answer calls from entrance and residential stations.
Procedure for calling entrance stations from the security guard unit.
Procedure for calling residential stations from the security guard unit.
How to initiate calls to other security guard stations.
Handling emergency alarms and setting reception mode.
Handling doorbell calls and reviewing missed calls.
To Next Page
