Aiphone GH-1KD User Manual

- 40 -
11-3
11-4
Door Release
1. Press the door release button while in communication.
2. The door release function will activate on the entrance station
that is in communication.
∗ Depending on the electric door release system that you use, the
door release may be active only while the door release button is
pressed.
Turning on the Entrance Light
1. Press the light button once while in communication.
2. The outside light of the entrance will turn on for the preset
duration of time. (4 -5)
11-6
Automatic Entry (Doctor Call) Option
1. A visitor presses the call button that has been assigned for
automatic entry.
2. The door is unlocked instantly.
3. The residential station for which the automatic entry function is
set is called. Press the talk button as necessary to respond.
4. Switching the automatic entry function on and off
• Press the light button while holding down the talk button of the
residential station for which this function is set to switch the
function on and off. When the function is on, the Call tone off
LED on GH-1KD & GH-1AD and TALK LED on GH-1MD
will flash at 2.5 second intervals in standby.
11-5
Calling the Security Guard Station
Press the light/security guard station call button on the residential
station. You will hear a low-volume call tone. When the system is
being used for communication, an in-use tone will be heard at the
residential station. (The call is only invalid when a
communication link has not been established.)
11-2
Calling from the Doorbell (at Individual Door)
1. The doorbell button is pushed. A call tone sounds as long as the
button is held down.
2. A different call tone sounds (there is no communication
available).
12
12
1
3
2
4
DOCTOR
2
B
A
C
1
3
E
D
F
5
K
J
L
4
H
G
I
6
N
M
O
8
U
T
V
7
R
Q
P
S
Y
X
W
Z
9
0
12

Aiphone GH-1KD Specifications

General

Brand	Aiphone
Model	GH-1KD
Category	Intercom System
Language	English