QR Code
Place
Holder
GT-1C
This operation guide describes the basic
functions of your GT Series Tenant Station
1 / 2017
This tenant station is powered by the system and will always
remain on, even when the screen is off. Contact the building
manager if the tenant station in this residence is not working.
Power Source
Speaker
GT-1C Operation Guide
|
1 of 1
GT-1C Tenant Station
For a complete operation manual (1.6 MB), scan QR code or use link to download
it from the manufacturer’s website:
www.aiphone.com/gt-1c_op-man
Use the
dial to
adjust the
LCD screen
brightness
levels (0~10).
LCD Screen
Brightness
Control
Use the dial
to adjust the
communication
volume (0~10).
Volume
Control
Use the dial to
adjust the chime
volume (0~10). The
TONE OFF light
blinks slowly when
the chime is muted.
Chime Volume
Control
Push the ADJUST button
to compensate for low or
bright backlight conditions
when viewing video from
a door station.
ADJUST Button
Push the ZOOM / WIDE
button to change the
screen view or to make
a menu selection.
ZOOM / WIDE Button
Push , , , or to change
the camera view (zoom-view
only). When making menu
selections, push
or to
change the cursor position.
Camera / Cursor Control Button
Push
the OFF
button to
end a call
(this does not turn
off the station).
OFF Button
Push the GUARD button to
call all guard and concierge
stations connected to the
system (if included). To view
a visitor on a CCTV camera
(if enabled), push the GUARD
button while in communication
with the entrance station.
GUARD Button
Push the OPTION button
to activate an external
device (if included).
OPTION Button
Push the door release
button to unlock the
entrance during a call.
Door Release Button
LCD Screen
Microphone
Push the TALK button
to answer an incoming
call. Once answered,
conversation becomes
hands-free. For push-to-talk (PTT) mode,
push the TALK button until a beep is
heard. The conversation then requires
the TALK button to be pushed and held
while talking and released while listening.
Whether the conversation is hands-free
or PTT, the talk indicator light turns on
while you speak and will turn off while
your visitor speaks.
TALK Button
Need help?
General
