ZOOM
101
102
103
201
202
SMITH
AIPHONE
DENTIST
LAINE
MENIN
1 / 1
101
  SMITH
*  Press 
WIDE
ZOOM
 or 
WIDE
ZOOM
 to turn the page of the list.
*   The list is displayed in order of either unit # or name.
*  This station is not displayed.
3  Press   ( ),   or lift handset.
When the call is answered
Communication starts and " " is displayed. 
*  Audio guidance will be heard depending on the settings.
4  To end communication, press   or hang 
up handset.
NOTE:   Communication will end automatically after approximately 
3 minutes. Communication with a residential/tenant station 
in hands-free mode ends automatically after 1 minute in 
hands-free mode.
B-
2
 Entering unit #
1  In standby mode, press 
WIDE
ZOOM
 or 
WIDE
ZOOM
WIDE
ZOOM
.
"UNIT #" screen is displayed.
2  [When the target unit number is numerals only] 
Enter the unit # using [0] to [9] on the 10-key.
[When the target unit number is alphanumeric] 
1 Press   ( ).
2 Enter the resident name using [0] to [9] on 
the 10-key.
*  How to enter letters (→P. 21).
UNIT #
10
3  Press   ( ),   or lift handset.
When the call is answered
Communication starts and " " is displayed. 
4  To end communication, press   or hang 
up handset.
NOTES:
•  Communication will end automatically after approximately 3 
minutes. Communication with a residential/tenant station in 
hands-free mode ends automatically after 1 minute in hands-free 
mode.
•   If both unit # 111 and 1111 exist, the resident name for unit 111 
will be displayed when 1, 1, 1 is entered, and the resident name 
for unit 1111 will be displayed if 1 is entered one more time.
•   Stations can be set to display in order by unit #. (The order starts 
with the lowest digit from 0 to 9 and then the order goes by 
letter.) In cases where unit # such as A101, A201, A901, A1001, 
and B101 exist, the order starts with the lowest digit and goes in 
the order A101, A201, A901, B101, A1001.
Selected unit # and name
Unit # and names are displayed in alphabetical 
or numerical order.
*  The arranging method differs depending on 
the setting.
Entered number is displayed.