Aiphone IX SERIES Programming Guide

For more details about the features and information above, please contact Technical Support.
Pg. 2
The new IXW-MA(s) will appear in the Station Settings List with station number and name set in the Add New Station window.
A default IP address of 192.168.1.10 (.11 for the second, .12 for the third, and so on) will be given to the station when added. This
IP address can be edited by clicking Station Details from the Advanced Setup section below.
Station Type
Select the IXW-MA using the Station
Type drop-down and enter the quantity
of IXW-MAs to be added. Click Add .
Station Information
Edit the station Number and Name for
the new IXW-MA(s).
Add
Click Ok to add the station.
Adding an IXW-MA to an Existing System
Getting Started
Step 1: Opening the System Conguration Settings
From the top menu bar, click Tools(T) and select System Conguration.
The IXW-MA is an IP relay with 10 congurable outputs that can be remotely triggered by a station based on its Contact Change
settings. Typically, these outputs are used for remote door release or to activate signaling devices. If the IXW-MA wasn't part of the
original system conguration, it will need to be added. If the IXW-MA is already part of the system, continue to page 4.
Click
Add New Station
Adding a Station
Step 2: Adding a New Station
The Add New Station window will open. Use this screen to add one or more IXW-MA stations.
Aiphone Corporation
|
www.aiphone.com
|
(800) 692-0200

Aiphone IX SERIES Specifications

General

Series	IX Series
Communication	IP Network
Audio	Yes
Video Codec	H.264
Network	Ethernet
Video	Yes
Integration	Yes
Security	Encrypted Communication
Power	PoE (IEEE 802.3af)
Video Resolution	720p HD
Audio Codec	G.711
Mounting	Wall Mount
Relay Outputs	Yes
Inputs	Yes
Relative Humidity	90% or less, non-condensing
Audio Output	Speaker (Internal or External)
Audio Input	Built-in Microphone
Type	Video Intercom