To Next PageTo Next Page
What to do if Aiphone Intercom System shows an error screen?
If your Aiphone Intercom System displays an error screen, it could be due to several reasons. The call destination might be busy, or the system could be disconnected, or there might be a configuration issue. In any of these cases, wait a while and then try the operation again. If the problem persists, contact the guard or property management company.
General| Series | IXG Series |
|---|---|
| Category | Intercom System |
| Power | PoE (Power over Ethernet) |
| Operating Voltage | 48V DC (PoE) |
| Audio Output | Built-in speaker |
| Microphone Sensitivity | -40 dB |
| Type | IP Video Intercom System |
| Network | Ethernet |
| Integration | Yes |
| Communication | Full Duplex |
| Video | HD Video |
| Wiring | CAT-5e or CAT-6 |
| Door Release | Yes |
| Operating Temperature | -10°C to 60°C |
| Weather Resistance | IP54 |
Details critical safety warnings for severe injury or death if ignored.
Outlines risks of injury or property damage from operational negligence.
Provides essential requests and guidelines for safe and correct system operation.
Identifies and describes the physical components of the IXG entrance station.
Provides step-by-step instructions for calling a tenant via unit number.
Details the process of receiving and speaking during an incoming call.
Guides on how to release an electric lock using an access code.
Explains how to unlock doors using cards, tags, or mobile devices (HID models).
Provides solutions for common error screens displayed by the system.
