17
How to use
Placing a call
3
Calling a Person to Visit
Calling using the keypad
The keypad can be used to call a tenant by entering their Unit Number.
Depending on the settings of this station, may not be displayed. In this case, it cannot be used.
Refer to “Displaying Operation Screens (→page 16)” for information on how to display operation screens.
Select the appropriate building if the Building Selection Screen is displayed first.
1. Enter the "Unit Number".
• Use to delete incorrectly entered Unit
Numbers.
2. Tap .
• The ringback tone or audio guidance will be
played.
To Next Page
Loading...
