Aiphone IXW-MA User Manual

Multi-purpose Adapter IXW-MA
IX Series
IP network-compatible intercom
Web Setting Manual
Software version 2.00 or later
Important
• Before configuring and using the system, read Web Setting Manual (this document) carefully.
• For the installation and connection of each device, refer to "Installation Manual."
• Begin installation after reading and understanding the procedures for system configuration.
• The system settings file is required for post-installation maintenance and service. The setting file must be given to the customer.
• The illustrations used in this manual may differ from the actual product.

Aiphone IXW-MA Specifications

General

Camera	Yes
Mounting	Wall Mount
Housing Material	Plastic
Connectivity	Wired
Audio	Full-Duplex Audio
Power Supply	PoE (IEEE 802.3af class 0)
Communication	IP
Power Source	PoE
Operating Temperature	0°C to 40°C
Operating Voltage	48V DC (PoE)

Summary

Introduction

Notational symbols in this manual

Explains the meaning of symbols used in the manual for important operational procedures.

Product manuals

Lists and describes the available manuals for the IX system, including where to find them.

Configuring the system

Details the two methods for configuring the IX system: using IX Support Tool or web browser configuration.

For Static IPv4 Address

Flowchart for creating a new setting file for static IPv4 address configuration.

For IPv4 Address with DHCP

Flowchart for creating a new setting file for IPv4 address with DHCP.

For static IPv6 address

Flowchart for creating a new setting file for static IPv6 address configuration.

For Stateless IPv6 Address

Flowchart for creating a new setting file for stateless IPv6 address configuration.

For IPv6 Address with DHCP

Flowchart for creating a new setting file for IPv6 address with DHCP.

Startup and configuration

System requirements

Lists the necessary PC and network requirements for system operation.

Part Names

Identifies the front and back physical components of the IXW-MA adapter.

Indicators

Details the status indicator patterns and their corresponding meanings.

Connecting to a PC

Provides instructions on how to connect the station to a PC using a PoE compatible switch.

Log in to the Web server of the station to be configured

Guides users on how to access and log into the station's web interface for configuration.

Setting window

Describes the station's web setting window and the process for configuring various settings.

System settings list

Provides a comprehensive list of system settings with access privileges and reference pages.

Configuring the Station

Station Information

Configure basic station details including identification, ID, password, language, and time.

Network Settings

Configure IP addresses (IPv4/IPv6), DNS, packet priority, and NTP settings.

Option Input / Relay Output Settings

Configure functions for option input ports and relay outputs, including schedules and control methods.

Function Settings

Configure various station functions such as email notifications, CGI, SIF, CSR, SSL certificates, and IEEE 802.1X.

Maintenance

Perform maintenance tasks including firmware updates, initialization, settings backup, and log viewing.