47
Startup and configuration
6. System settings list
The table below shows all the settings for the system.
The symbols indicate the following:
♦: Indicates a required field. A value must be entered. Retain the default settings, unless a change is necessary.
♣: Indicates that Support Tool has uploaded the data. If the entry is altered through a web browser, Support Tool will
not recognize the change.
• The following list shows an overview of web configuration. The content, how they are displayed, and the order of
entries may vary from the actual screens.
• Download the settings data and store it at a safe location (→page 90). Otherwise, it may become impossible to
restore the settings after fixing a failure.
Access privileges
A: Administrator
U: User
Entry
Access
privilege
s
Reference
Page
A U
Station Information
Identification - - Number♦♣ ✔ 52
Name ✔ 52
ID and Password - - Administrator ID♦♣ ✔ 53
Administrator Password♦♣ ✔ 53
User ID♦ ✔✔ 53
User Password♦ ✔✔ 53
Language - - Language ✔✔ 54
Time Time Zone - Select time zone ✔✔ 55
Daylight Savings Time - Enable automatic daylight
savings time
✔✔ 55
Date and Time - Set date and time ✔✔ 56
Expanded System - - - ✔ 57
Network Settings
IP Address Static / DHCP - - ✔ 58
IPv4 Address - IP Address♦♣ ✔ 59
Subnet Mask♦ ✔ 59
Default Gateway ✔ 59
IPv6 Address - IP Address♦♣ ✔ 59
Default Gateway ✔ 59
DNS Primary Server - IPv4 ✔ 60
IPv6 ✔ 60
Secondary Server - IPv4 ✔ 60
IPv6 ✔ 60