62
Configuring the Station
2.4 NTP
2.4.1 Enable NTP
2.4.2 Synchronization Interval [hour]♦
2.4.3 Primary Server
2.4.3.1 Address
■ IPv4
■ IPv6
Description Select Yes / No Use to synchronize the time with an NTP server.
Settings • Yes
• No Use
Default values No Use
Description Configure the interval to synchronize with the NTP server.
Settings 1-255 hours (by one hour)
Default values 24hour
Description Set the IPv4 Address for NTP Primary Server.
Go to
“DNS (→page 60)” to set hostname.
Settings 1.0.0.1-223.255.255.254 or hostname(1-64 alphanumeric characters)
Default values —
Description Set the IPv6 Address for NTP Primary Server.
Go to
“DNS (→page 60)” to set hostname.
Settings ::FF:0 - FEFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF or hostname (1 - 64 alphanumeric
characters)
Default values —
To Next Page
Loading...
