89
Configuring the Station
5.2 Initialization
How to initialize
1. Click [Initialization] or [Initialize User Settings].
• Initialization: All settings revert to their default values. The system log is cleared.
• Initialize User Settings: Only user settings are initialized.
2. Click [OK].
• Click [Cancel] to cancel the initialization.
Important
• After selecting "[Initialization]", the station will restart. This may take approx. 10 minutes in total. The station will not operate
until the restart is complete.
• If the initialization process fails, the message ("Error: Station initialization failed.") will appear. If this happens, perform
initialization again.
To Next Page
Loading...
