45
Startup and configuration
5. Setting window
When logging into the web server of the station, the following setting window will be shown. This window will be used
to configure the station.
• Depending on PC and OS being used, the window may be slightly different.
• After configuring the station, confirm its operation by referring to the "Operation Manual."
Setting window example
5.1 How to configure
1. Click the title to be configured.
• The setting window for that particular title will be displayed.
2. Configure settings for each entry.
3. When configuration is complete in this window, click [Update] to update the settings.
• When the settings are updated, "Settings updated." will be displayed at the top left corner in the window.
• If an update fails, an error message will be displayed.
• To cancel any changes, click another title in the setting menu.
• Do not remove power to the station while updating.
Settings window: This indicates the Settings window of the title
selected.
Update button: Click this button to update the station settings.
Setting menu: Shows all items that can be configured. Click the title to be configured and the appropriate setting
window will display.
To Next Page
Loading...
