58
Configuring the Station
2. Network Settings
2.1 IP Address
2.1.1 Static / DHCP
Important
• When a setting related to the IP Address is updated, the station will restart. In some cases, it may take up to 10 minutes for the
station to start up.
Description Select Static or DHCP for the selected IP version in "IP Version".
Settings • For IPv4:
– Static
– DHCP
• For IPv6:
– Static
– Stateless
– DHCPv6
Default values IPv4
• Static
Important
• Both IPv4 and IPv6 cannot be used in the same system.
• When selecting "DHCP" for IPv4, configure the system so that the DHCP server assigns a Static IP Address to each station.
• When selecting "Stateless" for IPv6, do not change the prefix of the device that can transmit RA.
• When selecting "DHCPv6" for IPv6, configure the system so that the DHCP server assigns a Static IP Address to each station.
The DUID of the station is "00030001 + MAC address."
• When setting up a product from another manufacturer, such as a DHCP server, refer to its manual.
To Next Page
Loading...
