Aiphone IXGW-GW - Page 5

5
Units / Stations - Adding Units
Units and their stations will be added to the system here. First, look to the top of the screen for the Display Settings
section. By default, each Unit is set to have one Master/Tenant Station, one Entrance/Door Station, and one
Mobile App. Use the drop-downs to select the number of stations the Units will have, then click
Apply
.
From left to right, select the Building Number the Unit will belong to, set the Unit Number, and click
the Unit Type button to select a Unit type. Once all Units have been added, enter a Unit Name for
each. At any point during this process, click
Save
to save the congured settings.
This is a universal setting. Select
quantities that reect your largest unit.
When adding multiple of the same Unit
Type, select a completed Unit Number
eld and press the Enter key twice.
This will auto-populate the next eld.
Once all Units have been added, enter a Unit Name for each. At any point during
this process, click
Save
to save the congured settings.
When adding multiple of the same
Unit Type, select a completed Unit
Number eld and press the Enter key.
This will auto-populate the next eld.
Continue by selecting the stations for each Unit, including Mobile apps. Once every
unit has been created and stations have been added, click
Save
.
When the Save button is clicked, the popup to the right will appear. Clicking
Yes
will automatically enable communication between all appropriate
stations and units for new systems as well as congure and enable door
release. Clicking
No
will require manual conguration of these settings.
When adding a door station with
an additional call button, such as
the IX-DVF-2RA or IX-SSA-2RA,
check with Emergency Button.
Site Settings (cont.)
If the system contains IXG mobile apps, the Gateway (IXGW-GW) is required. To add the Gateway to the system,
select Enable, then optionally edit its Station Name, and review the other settings. Once congured, click
Save
.
Use the drop-down menu under Gateway Number to select the Gateway added in the previous step.
Gateway Selection
Gateway Registration