Aiphone IXGW-GW - Page 6

6 | IXG Commercial Quickstart Guide SIP
Station Information
Network Settings
Edit the Admin ID and Password for each station, as well as optionally create an ONVIF and RTSP ID and Password
for each station. It is recommended that the Admin ID and Password are not adjusted once set.
IP Address
ID/Password (Optional)
From the side menu, expand Network Settings and select IP Address. Each station can be
manually assigned an IP address, or click
Batch IP Adress Conguration
near the top of
the screen to enter an IP address range to automatically assign all stations.
For systems with the IXGW-GW Gateway Adaptor, a Default Gateway must be added for the adaptor, and
optionally for all other stations. Consult the Network Administrator for more information if needed.
Edit the Station Number and the Station Name for each station in the system. The Station Name and
Station Number are typically only seen by stations within the same Unit for internal communication,
but it is recommended to give custom names to any Entrance or Door stations.
Identication
For systems with the IXGW-GW Gateway Adaptor, a DNS Address is required for the adaptor, and
optionally for all other stations. Consult the Network Administrator for more information if needed.
It is recommended to enable and congure NTP settings for each station when possible. For systems with
the IXGW-GW Gateway Adaptor, it will have NTP enabled and an Aiphone NTP server address set by default.
Adjusting this default server address is possible and recommended for sites with their own server.
DNS
NTP