Aiphone IXGW-GW - Page 8

8 | IXG Commercial Quickstart Guide SIP
Door Release Settings
If the Door Release Key on a door station is changed, this change will also need to be made for any
master station that will interact with that door station. Expand Function Settings and select Door Release,
then change the Door Release Keys to reect the changes made in the Relay Output section.
Function Settings - Door Release
Scroll to the right until the Door Release Key column, then change the 20 digit
key as needed. The Door Release Key can be 1-20 digits long.
Option Input/Relay Output - Relay Output
Once associated, each station will need to have its setting le uploaded to it. This setting le
contains all other system information and is required for the station to function. To upload the
settings to each station, select Connection on the top menu and click Upload Settings.
Once the upload is complete, select File from the top menu and click Export System Conguration. Export this system's
conguration to save as a backup if the settings are lost, or if they need to be moved to a new PC and Support Tool.
Select each station by placing a check mark next to it, or click
Select
to select all stations. Click
Settings
to
upload station settings. If Sounds, Images, or Schedules were congured, click their respective buttons.
Exporting System Conguration
Setting File Upload
If any stations fail, they may still
be booting up from the Association
Settings step. It is also important
to ensure that the programming
PC is in the same subnet range
as the stations. For example, if the
stations are set to 192.168.1.xx,
the PC should also be set to this.
Upload Settings