Aiphone JB-2MED - Page 15

- 15 -
Entrance monitoring
1. Press the MONITOR button.
2. The video monitor displays the image of entrance station 1 and the
audio is heard. If you do not press the TALK button, the caller will
not hear your voice.
3. Press the entrance MONITOR button again to switch to entrance
station 2. If a JA-D (audio only) unit is connected to entrance 2, it
is skipped (cannot be monitored).
4. Press the MONITOR button again to end.
NOTES: 1. To talk to the entrance station during monitoring, press
and release the TALK button. Press the TALK button
again to end the communication.
2. The entrance monitoring ends automatically after approx.
1 min. To monitor the entrance again, repeat from step 1.
3. If a call is received from another entrance station during
monitoring, it switches to the calling station.
Instant voice call function
1. The CALL button of the entrance station is pressed.
2. Even without answering, the door area can be seen and heard with
video and audio (for approx. 45 sec.). Inside sound is not heard
outside.
NOTES: JA-D does not have this function. Audio is only established
when the call is answered.
Instant voice call function
1. The CALL button of the entrance station is pressed.
2. Even without answering, the door area can be seen and heard with
video and audio (for approx. 45 sec.). Inside sound is not heard
outside.
NOTES: JA-D does not have this function. Audio is only established
when the call is answered.
Instant voice call function
1. The CALL button of the entrance station is pressed.
2. Even without answering, the door area can be seen and heard with
video and audio (for approx. 45 sec.). Inside sound is not heard
outside.
NOTES: JA-D does not have this function. Audio is only established
when the call is answered.
Español
Deutsch
Activating door release
1.
Press the DOOR RELEASE button in communication or monitoring.
2. The door is unlocked.
Activating door release
1.
Press the DOOR RELEASE button in communication or monitoring.
2. The door is unlocked.
Activating door release
1.
Press the DOOR RELEASE button in communication or monitoring.
2. The door is unlocked.
Activating door release
1.
Press the DOOR RELEASE button in communication or monitoring.
2. The door is unlocked.
Activating door release
1.
Press the DOOR RELEASE button in communication or monitoring.
2. The door is unlocked.
7-4
English
Nederlands
Français
Español
Español
Deutsch
Nederlands
7-5
Entrance monitoring
1. Press the MONITOR button.
2. The video monitor displays the image of entrance station 1 and the
audio is heard. If you do not press the TALK button, the caller will
not hear your voice.
3. Press the entrance MONITOR button again to switch to entrance
station 2. If a JA-D (audio only) unit is connected to entrance 2, it
is skipped (cannot be monitored).
4. Press the MONITOR button again to end.
NOTES: 1. To talk to the entrance station during monitoring, press
and release the TALK button. Press the TALK button
again to end the communication.
2. The entrance monitoring ends automatically after approx.
1 min. To monitor the entrance again, repeat from step 1.
3. If a call is received from another entrance station during
monitoring, it switches to the calling station.
Entrance monitoring
1. Press the MONITOR button.
2. The video monitor displays the image of entrance station 1 and the
audio is heard. If you do not press the TALK button, the caller will
not hear your voice.
3. Press the entrance MONITOR button again to switch to entrance
station 2. If a JA-D (audio only) unit is connected to entrance 2, it
is skipped (cannot be monitored).
4. Press the MONITOR button again to end.
NOTES: 1. To talk to the entrance station during monitoring, press
and release the TALK button. Press the TALK button
again to end the communication.
2. The entrance monitoring ends automatically after approx.
1 min. To monitor the entrance again, repeat from step 1.
3. If a call is received from another entrance station during
monitoring, it switches to the calling station.
Entrance monitoring
1. Press the MONITOR button.
2. The video monitor displays the image of entrance station 1 and the
audio is heard. If you do not press the TALK button, the caller will
not hear your voice.
3. Press the entrance MONITOR button again to switch to entrance
station 2. If a JA-D (audio only) unit is connected to entrance 2, it
is skipped (cannot be monitored).
4. Press the MONITOR button again to end.
NOTES: 1. To talk to the entrance station during monitoring, press
and release the TALK button. Press the TALK button
again to end the communication.
2. The entrance monitoring ends automatically after approx.
1 min. To monitor the entrance again, repeat from step 1.
3. If a call is received from another entrance station during
monitoring, it switches to the calling station.
English
Français
Deutsch
JB-2MEDJB-2MD
CALL
MONITOR
CALL
MONITOR
SET PLAY REC
21
JB-2MEDJB-2MD
21
43
JB-2MEDJB-2MD
JB-2MEDJB-2MD
CALL
MONITOR
CALL
MONITOR
SET PLAY REC