- 17 -
3. If the transferred station presses the TALK button, room-to-room
communication starts.
4. If the transferred station presses the TALK button again, it
switches to entrance station calling mode. By pressing the TALK
button once more, communication is established with the entrance
station. To end, press and release the TALK button.
NOTES: 1. The call-in from the entrance station will be held for 45
seconds. End the room-to-room communication within
this timeframe.
2. Communication ends automatically after approx. 1 min.
Transfer entrance call
1. Press the CALL button during communication with an entrance
station.
2. An image of the entrance is displayed on all of the monitor stations.
3. If the transferred station presses the TALK button, room-to-room
communication starts.
4. If the transferred station presses the TALK button again, it
switches to entrance station calling mode. By pressing the TALK
button once more, communication is established with the entrance
station. To end, press and release the TALK button.
NOTES: 1. The call-in from the entrance station will be held for 45
seconds. End the room-to-room communication within
this timeframe.
2. Communication ends automatically after approx. 1 min.
Transfer entrance call
1. Press the CALL button during communication with an entrance
station.
2. An image of the entrance is displayed on all of the monitor stations.
3. If the transferred station presses the TALK button, room-to-room
communication starts.
4. If the transferred station presses the TALK button again, it
switches to entrance station calling mode. By pressing the TALK
button once more, communication is established with the entrance
station. To end, press and release the TALK button.
NOTES: 1. The call-in from the entrance station will be held for 45
seconds. End the room-to-room communication within
this timeframe.
2. Communication ends automatically after approx. 1 min.
Transfer entrance call
1. Press the CALL button during communication with an entrance
station.
2. An image of the entrance is displayed on all of the monitor stations.
3. If the transferred station presses the TALK button, room-to-room
communication starts.
4. If the transferred station presses the TALK button again, it
switches to entrance station calling mode. By pressing the TALK
button once more, communication is established with the entrance
station. To end, press and release the TALK button.
NOTES: 1. The call-in from the entrance station will be held for 45
seconds. End the room-to-room communication within
this timeframe.
2. Communication ends automatically after approx. 1 min.
Transfer entrance call
1. Press the CALL button during communication with an entrance
station.
2. An image of the entrance is displayed on all of the monitor stations.
3. If the transferred station presses the TALK button, room-to-room
communication starts.
4. If the transferred station presses the TALK button again, it
switches to entrance station calling mode. By pressing the TALK
button once more, communication is established with the entrance
station. To end, press and release the TALK button.
NOTES: 1. The call-in from the entrance station will be held for 45
seconds. End the room-to-room communication within
this timeframe.
2. Communication ends automatically after approx. 1 min.
Deutsch
Deutsch
Français
Nederlands
Español
7-8
Automatic recording
If a call is received from the entrance, the unit starts recording
automatically. The REC button lights during recording.
• 16-picture/4-frame mode: Records at approx. 2 sec., 6 sec., 10 sec.
and 14 sec. from time of call-in.
• 16/32/60-picture mode: Records after approx. 2 sec.
NOTES: 1. The automatic recording function cannot be cancelled.
2. The screen shown when monitoring the entrance is not
recorded automatically. If you wish to record this screen,
press REC button.
3. When automatic recording has finished, for approx. 15
sec. after the monitor screen goes off, automatic
recording will not be activated for the same entrance
station even if a call is placed (to prevent prank calls).
Automatic recording
If a call is received from the entrance, the unit starts recording
automatically. The REC button lights during recording.
• 16-picture/4-frame mode: Records at approx. 2 sec., 6 sec., 10 sec.
and 14 sec. from time of call-in.
• 16/32/60-picture mode: Records after approx. 2 sec.
NOTES: 1. The automatic recording function cannot be cancelled.
2. The screen shown when monitoring the entrance is not
recorded automatically. If you wish to record this screen,
press REC button.
3. When automatic recording has finished, for approx. 15
sec. after the monitor screen goes off, automatic
recording will not be activated for the same entrance
station even if a call is placed (to prevent prank calls).
Automatic recording
If a call is received from the entrance, the unit starts recording
automatically. The REC button lights during recording.
• 16-picture/4-frame mode: Records at approx. 2 sec., 6 sec., 10 sec.
and 14 sec. from time of call-in.
• 16/32/60-picture mode: Records after approx. 2 sec.
NOTES: 1. The automatic recording function cannot be cancelled.
2. The screen shown when monitoring the entrance is not
recorded automatically. If you wish to record this screen,
press REC button.
3. When automatic recording has finished, for approx. 15
sec. after the monitor screen goes off, automatic
recording will not be activated for the same entrance
station even if a call is placed (to prevent prank calls).
English
Français
01/APR/04 15:30
16-picture, 4-frame mode 16/32/60-picture mode
6 sec.2 sec.
14 sec.10 sec.
2 sec.
01/APR/04 15:30
JB-2MED
SET PLAY REC
To Next Page
Loading...
