Aiphone JB-2MED - Page 18

- 18 -
Manual recording
1. Display a video image with the entrance MONITOR button.
2. Press the REC button. The REC button lights and recording starts.
NOTES: 1. Even if 16-picture/4-frame mode is selected, only 1 frame
is recorded in manual mode.
2. If manual recording is activated when a call is received
from an entrance station, it overwrites the automatically
recorded image.
Manual recording
1. Display a video image with the entrance MONITOR button.
2. Press the REC button. The REC button lights and recording starts.
NOTES: 1. Even if 16-picture/4-frame mode is selected, only 1 frame
is recorded in manual mode.
2. If manual recording is activated when a call is received
from an entrance station, it overwrites the automatically
recorded image.
Manual recording
1. Display a video image with the entrance MONITOR button.
2. Press the REC button. The REC button lights and recording starts.
NOTES: 1. Even if 16-picture/4-frame mode is selected, only 1 frame
is recorded in manual mode.
2. If manual recording is activated when a call is received
from an entrance station, it overwrites the automatically
recorded image.
Manual recording
1. Display a video image with the entrance MONITOR button.
2. Press the REC button. The REC button lights and recording starts.
NOTES: 1. Even if 16-picture/4-frame mode is selected, only 1 frame
is recorded in manual mode.
2. If manual recording is activated when a call is received
from an entrance station, it overwrites the automatically
recorded image.
Manual recording
1. Display a video image with the entrance MONITOR button.
2. Press the REC button. The REC button lights and recording starts.
NOTES: 1. Even if 16-picture/4-frame mode is selected, only 1 frame
is recorded in manual mode.
2. If manual recording is activated when a call is received
from an entrance station, it overwrites the automatically
recorded image.
Español
Nederlands
7-9
English
Français
Nederlands
Español
Español
Deutsch
7-10
Absence set (Auto absence recording)
1. If the SET button is pressed once (less than 2 sec.), it will light and
the unit will be set.
2. If the absence set (auto absence recording) is operating, the SET
button flashes to show that there has been a caller (if the image is
played, it goes back to being lit). When the image is played, the
number of callers who came while you were out is displayed.
Example: "2/5" means Second image from a total of 5.
3.
Press the SET button again to cancel. The SET button light will go off.
1. In step 1, if pressed and held for more than 2 sec., it will enter
setting mode.
NOTES: Cancellation in step 3 is not possible while the SET button is
flashing. First play the recorded screen.
Absence set (Auto absence recording)
1. If the SET button is pressed once (less than 2 sec.), it will light and
the unit will be set.
2. If the absence set (auto absence recording) is operating, the SET
button flashes to show that there has been a caller (if the image is
played, it goes back to being lit). When the image is played, the
number of callers who came while you were out is displayed.
Example: "2/5" means Second image from a total of 5.
3.
Press the SET button again to cancel. The SET button light will go off.
1. In step 1, if pressed and held for more than 2 sec., it will enter
setting mode.
NOTES: Cancellation in step 3 is not possible while the SET button is
flashing. First play the recorded screen.
Absence set (Auto absence recording)
1. If the SET button is pressed once (less than 2 sec.), it will light and
the unit will be set.
2. If the absence set (auto absence recording) is operating, the SET
button flashes to show that there has been a caller (if the image is
played, it goes back to being lit). When the image is played, the
number of callers who came while you were out is displayed.
Example: "2/5" means Second image from a total of 5.
3.
Press the SET button again to cancel. The SET button light will go off.
1. In step 1, if pressed and held for more than 2 sec., it will enter
setting mode.
NOTES: Cancellation in step 3 is not possible while the SET button is
flashing. First play the recorded screen.
Absence set (Auto absence recording)
1. If the SET button is pressed once (less than 2 sec.), it will light and
the unit will be set.
English
Français
Deutsch
Automatic recording
If a call is received from the entrance, the unit starts recording
automatically. The REC button lights during recording.
• 16-picture/4-frame mode: Records at approx. 2 sec., 6 sec., 10 sec.
and 14 sec. from time of call-in.
• 16/32/60-picture mode: Records after approx. 2 sec.
NOTES: 1. The automatic recording function cannot be cancelled.
2. The screen shown when monitoring the entrance is not
recorded automatically. If you wish to record this screen,
press REC button.
3. When automatic recording has finished, for approx. 15
sec. after the monitor screen goes off, automatic
recording will not be activated for the same entrance
station even if a call is placed (to prevent prank calls).
Automatic recording
If a call is received from the entrance, the unit starts recording
automatically. The REC button lights during recording.
• 16-picture/4-frame mode: Records at approx. 2 sec., 6 sec., 10 sec.
and 14 sec. from time of call-in.
• 16/32/60-picture mode: Records after approx. 2 sec.
NOTES: 1. The automatic recording function cannot be cancelled.
2. The screen shown when monitoring the entrance is not
recorded automatically. If you wish to record this screen,
press REC button.
3. When automatic recording has finished, for approx. 15
sec. after the monitor screen goes off, automatic
recording will not be activated for the same entrance
station even if a call is placed (to prevent prank calls).
JB-2MED
T
A
L
K
C
A
L
L
MONITOR
R
E
C
P
L
A
Y
S
E
T
JB-2MED
T
A
L
K
C
A
L
L
MONITOR
R
E
C
P
L
A
Y
S
E
T
JB-2MED
JB
-2ME
D
T
A
L
K
C
A
L
L
MONITOR
R
E
C
P
L
A
Y
S
E
T
01/APR/04 14:30
SETSET
2/5
1
3
2
2/5
JB
-2M
ED
T
A
L
K
C
A
L
L
MONITOR
R
E
C
P
L
A
Y
S
E
T
SET SET
JB-2MED