· When the relay 1 output time is
set to latched output, the
auto-relock function is
disabled.
· When the auto-relock function
is turned on, the unlock
function of the request to
exit/entry button of relay 2 is
disabled.
· If the 0 key illumination function
is turned on while the timer is
on, only the 0 key illumination
will light up, even if the "key
illumination time setting" is set
to "Indicator is continually lit".
OFF
ON
OFF
ON O
FFOFF ONON
O
peration
tone OFF
Operation
tone ON
Operation
tone OFF
Operation
tone ON
Relays 1 and 2
are both linked
Relays 1 and 2
are both linked
Only relay 1
is linked
Input the setting code.
Input the setting code. Input the setting code. Input the setting code.
Lockout
(Default: OFF)
Auto-relock
(Anti-tailgate)
(Default: OFF)
Timer-linked unlocking setting
(Default: relay 1, OFF)
Operation sound settings
(Default: ON)
0 key illumination ON
while timer is on
0 key illumination OFF
while timer is on
0 key illumination ON
while timer is on
0 key illumination OFF
while timer is on
Inputting the number of operations
(ex.
：
10 times)
10 -99
Inputting length of time in "Lockout" mode
(Ex.: 10 seconds)
10 - 99
Input the master code twice.
(Default : )
Only relay 1
is linked
Only relay 2
is linked
Only relay 2
is linked
Beep
(orange)
Illumination
(green)
Blinking
Bleep, Bleep
Illumination BlinkingIllumination BlinkingIllumination Blinking Illumination Blinking
BleepBleepBleep Bleep
Illumination BlinkingIllumination Blinking Illumination Blinking
BleepBeep Beep
Illumination Blinking Illumination Blinking
Bleep
Illumination Blinking
Bleep
Illumination Blinking
Beep
Illumination Blinking
Beep
-
When the key is pressed, the green LED lights up, the buzzer beeps twice, and the system exits the setting mode.
(If the key is included in the user code and the master code, the system does not exit the setting mode.)
- You can continue the setting up operation by entering an arbitrary setting code.
Indicator
goes out
Blinking
Bleep,
Bleep
To Next Page
Loading...
