16
[INSTALL] menu
First display the [INSTALL] menu window to start making your
settings.
The screen will turn off if approx. one minute elapses with no
*
operation during the setting. When this occures, display the
[INSTALL] menu window again.
If screen is off, press the [HOME] button, or touch
1
screen to turn it on.
When the message "SET CURRENT DATE AND
2
TIME." is displayed, touch
HOME
.
HOME window is displayed.
Press and hold the [HOME] button, then
3
touch
SETTINGS
→
INSTALL
.
If the [HOME] button is released before this step has
*
been performed, the display returns to HOME window.
A notice message is displayed. You can release the [HOME]
button.
Touch
4
ENTER
to continue the setting.
SETTINGS AFTER INSTALLATION
After installation, program the initial settings to activate the connected external devices.
NOTES:
These settings should be made by the installer before the system is used.
•
It is recommended to set the display language for the screen to the language needed. (Default language: English)
•
Refer to the "Operation manual" for setting the language.
Setting list
Item Sub item Setting range Default
INSTALL
SECURITY SENSOR
INPUTS
(Usage of the inputs 1 - 3) DISABLE/UTILITY/SECURITY/
REQUEST TO EXIT (Inputs 1 and 2 only)/
EXT. TALK INPUT (Inputs 3 only)
DISABLE (for each)
(Detection method for the inputs 1 - 3) N/O, N/C N/O (for each)
OPTION OUTPUT EVENT ACTIVATION DISABLE/ENABLE DISABLE
DURATION MOMENTARY, 1, 3, 5, 10, 15, 20, 25, 30, 60 sec. MOMENTARY
TRIGGER EVENT DOOR CALL/ROOM CALL/ALARM ON/VIDEO OUT (All are selected.)
SET DOOR RELEASE LOCK1/
LOCK2
OUTPUT METHOD N/O, N/C N/O
REFERENCE DOOR
(for DOOR1 - 4)
SHOW/HIDE SHOW (for each)
DOOR RELEASE
DURATION
MOMENTARY, 1, 3, 5, 10, 15, 20, 25, 30, 60 sec. MOMENTARY
INITIALIZE - YES/NO -
SOFTWARE VERSION - - -
or
To Next Page
Loading...
