Aiphone MK-DVF-HID User Manual

Vandal Resistant Black & White Video Door Station
With Built in Proximity Card Reader
MK-DVF-HID
(front view)
MK-DVF-HID
(back view)
- INSTRUCTIONS-
The MK-DVF-HID is an MK-series Black & White video door station and an HID ProxPoint Plus
Card Reader, built onto the same stainless steel faceplate. The card reader provides electronic
access to a building through a separate Access Control System, which is not supplied by
Aiphone.
11-⅝”
INSTALLATION:
1. For flush mounting, cut hole in wall and use supplied back box.
Box dimensions are 4-½”W x 10-⅜”H x 1-¾”D.
2. For surface mounting, use the SBX-DVF-P surface mount box.
This box can mount to a standard 1- gang box or to any flat surface.
20" pigtail cable
Wiegand Wire Color
+ DC (5-16V) Red
Ground Black
Data0 Green
Data1 White
Shield Ground Drain
Green LED Orange
Red LED Brown
Beeper Yellow
Hold Blue
Card Present Violet
Pg. 1
Connecting the Reader to the Host:
Connect the reader to the host according to the
wiring table below and the host installation guide.
5-¾”

Aiphone MK-DVF-HID Specifications

General

Type	Video Door Station
Vandal Resistant	Yes
Operating Temperature	-10°C to +50°C
Ingress Protection Rating	IP54
Audio Output	Built-in Speaker
Audio	Full duplex audio
Wiring	2-wire
Housing Material	Aluminum
Compatible Systems	Aiphone
Operating Voltage	24V DC

Summary

Instructions

Installation

Details on flush and surface mounting procedures for the video door station.

Connecting the Reader to the Host

Guide for wiring the card reader to the host access control system.

Wiring Diagram

Testing and Operation

Specifications

FCC Warning