To Next PageTo Next PageWhy does my AIPTEK Projector get so hot?
It's normal for the AIPTEK Projector to generate heat during extended use due to its high-luminance LED. Ensure that the ventilation slots are free from obstructions and that the projector is used in a well-ventilated area.
How to fix AIPTEK POCKETCINEMA T25 that will not turn on?
If your AIPTEK Projector isn't turning on, try the following: * Ensure all connectors are correctly plugged in. * Verify that you're using a USB 2.0 port. * Try a different USB 2.0 port or another computer. * Check if the power LED indicator is ON. * Connect directly to the notebook's USB port, bypassing any hubs. * Unplug other USB devices. * Restart your computer after driver installation. * Unplug and re-insert the device.
What to do if the AIPTEK Projector image is too dark?
If the projected image from your AIPTEK Projector is too dark: * Use the projector in a darker environment. * Increase the brightness using the AC power adapter. * Decrease the size of the projected image.
How to fix: can't click Pico Projector application on AIPTEK POCKETCINEMA T25 Projector?
If you're unable to click the Pico Projector application, start your computer in Safe Mode and uninstall the driver.
General| Resolution | 854 x 480 (WVGA) |
|---|---|
| Contrast Ratio | 1000:1 |
| Projection Technology | DLP |
| Aspect Ratio | 16:9 |
| Lamp Life | 20, 000 hours |
| Inputs | HDMI, USB |
| Built-in Speaker | Yes, 1W |
| Power Source | Built-in lithium battery or AC adapter |
Statement regarding compliance with Federal Communications Commission (FCC) rules for digital devices.
Specific warnings about potential hearing damage from high volume and eye safety from projector beam.
Recommendations for proper usage and restrictions, including cleaning and environmental conditions.
Identification and description of the projector's main components, connections, and indicators.
Guidance on driver installation for Windows XP and Windows Vista/7, including security prompts.
Details on 'Full Screen', 'Compatible Mode', and 'Exit' functions for projection.
Suggestions to improve projection performance on systems with Atom CPUs or single-core processors.
Check points for issues related to the projector failing to power on.
Troubleshooting steps for a dim or dark projected image.
Solutions for application launch problems and explanations for projector surface temperature.
