Air-Flo Quick-Silver - Page 42




CONDITION
CONDITIONCONDITION
CONDITION POSSIBLE CAUSE
POSSIBLE CAUSEPOSSIBLE CAUSE
POSSIBLE CAUSE CORRECTION
CORRECTIONCORRECTION
CORRECTION
Snowplow does not perform the selected
function or performs a different function.
1) Hydraulic hose routing is incorrect.
2) Cab control or hydraulic system malfunc-
tion.
1) See an Air-Flo dealer for repair information.
2) See an Air-Flo dealer for repair information.
Fluid Leaks from the hydraulic power unit.
1) Reservoir overfilled.
2) Loose or damaged hydraulic fittings, hoses,
plugs, or hardware.
1) Drain excess fluid and verify proper fluid
level.
2) Tighten loose components or see an Air-Flo
dealer for repair information.
Fluid leaks from angle or lift arms.
1) Angle or lift ram gland nut loose.
2) Hydraulic fittings or hoses loose or dam-
aged.
3) Angle or lift rams damaged.
1) Tighten ram gland nut or see an Air-Flo
dealer for repair information.
2) Tighten or replace components, or see an
Air-Flo dealer for repair information.
3) See an Air-Flo dealer for repair information.
Cab control fuses blown. 1) Motor relay or cab control malfunction, or
fault in wiring.
1) See an Air-Flo dealer for repair information.
manual-final.qxd 11/17/2006 12:45 PM Page 42