EasyManua.ls Logo

Air King BFQ110 User Manual

Air King BFQ110
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT
YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
GENERAL SAFETY INFORMATION
When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire,
electric shock and injury to person, including the following:
1. Read all instructions before installing or using exhaust fan.
2. Use this unit only in the manner intended by the manufacturer.
If you have questions, contact the manufacturer.
3. Before servicing or cleaning the unit, switch power off at
service panel and lock the service disconnecting means to
prevent power from being switched on accidentally. When
the service disconnecting means cannot be locked, securely
fasten a prominent warning device, such as a tag, to the
service panel.
4. Installation work and electrical wiring must be done by
qualified person(s) in accordance with all applicable codes
and standards, including fire-related construction.
5. Sufficient air is needed for proper combustion and exhausting
of gases through the flue (chimney) of fuel burning equipment
to prevent back drafting. Follow the heating equipment
manufacturer’s guideline and safety standards such as those
published by the National Fire Protection Association (NFPA)
and the American Society for Heating, Refrigeration, and Air
Conditioning Engineers (ASHRAE), and the local code authorities.
CAUTION: FOR GENERAL VENTILATING USE ONLY. DO
NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS
AND VAPORS.
Models: BFQ50, BFQ70, BFQ75, BFQ90,
BFQ110, BFQ140, BFQ175
www.airkinglimited.com
2A0572021 Rev. C 6/06
Exhaust Fan
SAVE THESE INSTRUCTIONS
6. When cutting or drilling into wall or ceiling, do not damage
electrical wiring and other hidden utilities.
7. Ducted fans must always be vented to the outdoors.
8. This unit must be grounded.
9. To avoid motor bearing damage and noisy and/or unbalanced
impellers, keep drywall spray, construction dust, etc. off
power unit.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
DO NOT USE THIS FAN WITH ANY SOLID-STATE SPEED CONTROL
DEVICE.
10. Acceptable for use over a bathtub or shower when installed
in a GFCI protected branch circuit.
11. NEVER place a switch where it can be reached from a tub or
shower.
WARNING: DO NOT USE IN KITCHENS
IMPORTANT INSTRUCTIONS -
OPERATING MANUAL
1 of 8

Other manuals for Air King BFQ110

Questions and Answers:

Air King BFQ110 Specifications

General IconGeneral
BrandAir King
ModelBFQ110
CategoryFan
LanguageEnglish

Summary

General Safety Information

Basic Precautions for Electrical Appliances

Follow basic precautions to reduce risk of fire, electric shock, and injury when using appliances.

Safety During Installation and Wiring

Ensure installation is by qualified persons, ground unit, vent outdoors, and avoid damaging utilities.

Specific Safety Warnings

Do not use with solid-state speed controls; ensure GFCI protection over tubs/showers.

Usage Restrictions

For general ventilating use only; do not use for hazardous materials or in kitchens.

Installation Instructions

Preparing the Exhaust Fan

Unpack fan, verify parts, remove wire compartment cover, and select location for best performance.

New Construction Installation

Align mounting bracket with joist, ensure flush fit with ceiling, and secure bracket.

Existing Construction Installation

Trace housing, cut opening carefully, avoid utilities, and position housing against joist/stud.

Ducting Requirements

Connect ducting to collar, secure with tape/clamp, and always vent fan to the outside.

Wiring and Completing Installation

Wiring Connections

Connect house wiring to fan's receptacle: white to white, black to black, ground to green.

Finishing the Installation

Reinstall wire cover, check blower wheel spins freely, plug in motor cord, and install grill.

Testing and Troubleshooting

Restore power to test installation; consult guide for issues like fan not operating or slow airflow.

Use and Care

Cleaning the Grill

Remove grill, clean with mild detergent and soft cloth. Do not use abrasive pads or scouring powders.

Cleaning the Fan Assembly

Unplug motor, wipe parts with dry cloth or vacuum. Never immerse electrical parts in water.

Limited Warranty and Support

Warranty Details

One-year warranty against defects for ventilation fans; five years for range hoods. Excludes labor, shipping, and misuse.

Technical Assistance

Call 1-800-465-7300 for parts or technical assistance weekdays 8 AM-4 PM EST.

Related product manuals