Need help?Do you have a question about the Aircommand IBIS and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Cooling Capacity | 2.4 kW |
| Heating Capacity | 2.4 kW |
| Power Supply | 240 V AC, 50 Hz |
| Weight | 9 kg (Indoor Unit) |
| Operating Temperature Range (Cooling) | 18°C |
Details terms and conditions for warranty service and claims within Australia.
Outlines warranty coverage and claim procedures for products purchased outside Australia.
Explains the design and function of the Aircommand IBIS air conditioning unit for caravans.
Factors affecting the air conditioner's performance, including insulation and heatload reduction.
Guidance on preventing and managing condensation within the unit and vehicle.
Requirements for using a generator to power the IBIS unit, including power quality.
Lists all main components and fittings required for the installation of the IBIS unit.
Essential preparatory steps and warnings before commencing the installation process.
Guidelines for selecting the optimal mounting position for the rooftop unit.
Instructions on evaluating roof structural integrity to support the unit's weight.
Procedure for applying the roof seal gasket to ensure a watertight fit.
Steps for accurately placing the unit onto the prepared roof opening.
Guidance on connecting the unit to the vehicle's electrical system safely.
Table and instructions for adjusting hold down bolts and duct length based on roof thickness.
Instructions for assembling the internal duct components with the brace.
Steps for connecting the main duct assembly to the rooftop unit.
Procedure for securing the internal plenum cover and filters.
Instructions for cleaning and maintaining the air intake filters.
Recommendations for periodically checking the tightness of unit mounting bolts.
Advice on operating the unit during storage and protecting it from elements.
Contact information and procedure for initiating a warranty claim.
Technical dimensions and weight of the main IBIS air conditioning unit.
Technical dimensions and weight of the internal air discharge plenum.
How to select and operate the unit in cooling mode, including fan speeds and temperature settings.
How to select and operate the unit in heating mode, including temperature settings.
Using the unit for dehumidification and its specific operating parameters.
Activating sleep mode to adjust temperature settings for nighttime comfort.
How to lock the control panel settings to prevent accidental changes.
Changing the temperature display between Celsius and Fahrenheit.
To Next Page
