Need help?Do you have a question about the Aircommand sandpiper and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Supply Voltage | 220-240V |
| Power Supply | 50Hz |
| Operating Temperature | 16°C - 32°C |
| Noise Level | 52 dB |
Explains the intended use and scope of the air conditioning unit.
Provides tips to maximize the air conditioner's performance and user comfort.
Details causes of condensation and recommended actions to prevent it.
Advises on using portable generators to power the unit.
Lists the primary parts included with the Sandpiper air conditioner.
Lists the hardware and fasteners required for installation.
Details the procedure and frequency for cleaning or replacing the unit's air filter.
Recommends checking the tightness of unit mounting screws periodically.
Advises on inspecting compressor mounting rubbers for wear.
Provides guidance on running the unit during periods of inactivity.
Outlines how to contact Aircommand for warranty service and required information.
Explains the layout and functions of the unit's main control interface.
Guides users on how to set the current time and day on the control panel.
Details how to operate the unit in cooling mode and set temperatures.
Describes how to use the unit for air circulation without heating or cooling.
Explains operation in heating mode and setting temperatures.
Covers the dehumidification function and its operation.
Explains the automatic mode that selects cooling or heating as needed.
Describes the sleep mode feature that adjusts temperature gradually.
Provides instructions for setting the unit's timer functions.
Explains how to lock the control panel buttons to prevent accidental changes.
Details how to switch between Celsius and Fahrenheit temperature units.
Explains the functionality and use of the remote control.
Lists common causes and solutions for the unit failing to power on or function.
Addresses issues related to insufficient cooling or heating output.
Explains why airflow might not result in desired temperature changes.
Describes the normal delay in airflow during heating startup.
Provides reasons for unusual noise from the air conditioner.
Explains causes of condensation dripping from ductwork.
Discusses potential causes for water leakage from the unit base.
Troubleshoots issues with the unit's timer not functioning correctly.
To Next Page
