What to do if my Airelec Premier Pro Electric Heater does not heat?
If your Airelec Electric Heater isn't heating, try these steps: First, ensure the switch is set to position 1. Check the setpoint value. Consider whether the room temperature actually requires heating. Also, verify that the shunt system hasn't cut off the power to the device and that the installation circuit breakers haven't tripped.
General| Frequency | 50Hz |
|---|---|
| Remote Control | No |
| Power Output | 2000W |
| Functions | Heating |
| Safety Features | Overheat protection |
Instructions for turning the heating device on or off using the main switch.
Detailed steps for turning the heating on and off via the control buttons.
Guide on how to adjust the desired room temperature using the +/- buttons.
How to activate the economy mode for energy saving during short absences.
Using the frost protection mode to maintain a minimum temperature during long absences.
Explains the open window detection function and its automatic heating shut-off feature.
Procedure to lock the control unit keypad to prevent unauthorized changes.
How to activate the automatic heating operation via a programming control unit.
Enables automatic heating operation using predefined programs P1, P2, or P3.
To Next Page
