What to do if my Airelec Tactic Pro does not heat?
If your Airelec Electric Heater isn't heating, try these steps: First, ensure the switch is set to position 1. Check the setpoint value. Consider whether the room temperature actually requires heating. Also, verify that the shunt system hasn't cut off the power to the device and that the installation circuit breakers haven't tripped.
Controls the power on/off of the device using the main switch.
Steps to turn the device on or off using the control buttons.
How to adjust the desired temperature using the '+' and '-' buttons.
How to switch to Economy mode for energy saving.
How to activate Frost Protection mode for long absences.
How to activate/deactivate the open window detection feature.
How to lock and unlock the control panel keypad.
How to use the automatic programming mode.
How to select a pre-defined program for each day of the week.
Technical specifications and dimensions of the device.
General| Frequency | 50 Hz |
|---|---|
| Heating power | 2000W |
| Functions | Overheat protection |
| Mounting | Wall-mounted |
| Power | 2000W |
| Voltage | 230 V |
| Safety Features | Overheating protection |
| Heating Modes | Frost protection |
To Next Page
