What to do if my Airelec Basic Pro Electric Heater does not heat?
If your Airelec Electric Heater isn't heating, try these steps: First, ensure the switch is set to position 1. Check the setpoint value. Consider whether the room temperature actually requires heating. Also, verify that the shunt system hasn't cut off the power to the device and that the installation circuit breakers haven't tripped.
Instructions on turning the heating device on and off using the main switch.
Details on activating and deactivating heating via the MODE button.
Guide to adjusting desired temperature using plus and minus buttons.
How to activate economy mode for energy saving during short absences.
Using frost protection mode to maintain minimum temperature during long absences.
Functionality for automatically cutting off heating upon detecting an open window.
Instructions for locking or unlocking the control keypad to prevent unintended changes.
Enabling automatic operation via programming control unit or individual programmer.
Details on using predefined programs for automatic heating control.
General| Mounting | Wall-mounted |
|---|---|
| Voltage | 230V |
| Frequency | 50Hz |
| Color | White |
| Type | Convector heater |
| Power | 2000W |
| Thermostat | Electronic thermostat |
| Safety Features | Overheat protection |
To Next Page
