To Next PageTo Next Page
Need help?Do you have a question about the AirMan SDG25S-8E1 and is the answer not in the manual?
Precautions to take before operating the machine.
Precautions to take while the machine is running.
Precautions for safe inspection and maintenance.
Information on safety warning labels attached to the machine.
Detailed description of the internal parts of the machine.
Instructions on how to safely transport the unit.
Requirements for proper unit installation location and environment.
Procedures for grounding the machine for safety.
Guidance on choosing appropriate cables for the load.
Operation and installation of the fuel pipe selector valve for external tanks.
Identification and function of instruments on the control panel.
Overview of protection devices and safety measures during operation.
Procedures for connecting loads, managing power output, and understanding terminals.
Checks for engine oil, coolant, fuel, and other pre-start requirements.
Step-by-step guide for starting, running, stopping, and emergency procedures.
Table of common symptoms, causes, and counter-measures for generator issues.
General precautions and safety measures for inspection and maintenance.
Daily inspection procedures and importance of keeping an operation log.
List of parts that require periodic replacement and their part numbers.
Schedule for periodic inspection and maintenance tasks based on operating hours.
Detailed procedures for key maintenance tasks like oil, filter, coolant, and battery.
Importance of periodic load operation to prevent carbon buildup and engine damage.
Procedures for preparing the machine for long-term storage.
Technical specifications for the SDG25S-8E1 model.
Dimensional outline drawing of the SDG25S-8E1 model.
Electrical wiring diagram for the generator unit.
Wiring diagram for the engine control unit and sensors.
Diagram illustrating the fuel piping system of the generator.
Precautions to take before operating the machine.
Precautions to take while the machine is running.
Precautions for safe inspection and maintenance.
Information on safety warning labels attached to the machine.
Detailed description of the internal parts of the machine.
Instructions on how to safely transport the unit.
Requirements for proper unit installation location and environment.
Procedures for grounding the machine for safety.
Guidance on choosing appropriate cables for the load.
Operation and installation of the fuel pipe selector valve for external tanks.
Identification and function of instruments on the control panel.
Overview of protection devices and safety measures during operation.
Procedures for connecting loads, managing power output, and understanding terminals.
Checks for engine oil, coolant, fuel, and other pre-start requirements.
Step-by-step guide for starting, running, stopping, and emergency procedures.
Table of common symptoms, causes, and counter-measures for generator issues.
General precautions and safety measures for inspection and maintenance.
Daily inspection procedures and importance of keeping an operation log.
List of parts that require periodic replacement and their part numbers.
Schedule for periodic inspection and maintenance tasks based on operating hours.
Detailed procedures for key maintenance tasks like oil, filter, coolant, and battery.
Importance of periodic load operation to prevent carbon buildup and engine damage.
Procedures for preparing the machine for long-term storage.
Technical specifications for the SDG25S-8E1 model.
Dimensional outline drawing of the SDG25S-8E1 model.
Electrical wiring diagram for the generator unit.
Wiring diagram for the engine control unit and sensors.
Diagram illustrating the fuel piping system of the generator.
General| Model | SDG25S-8E1 |
|---|---|
| Efficiency | >90% |
| No Load Current | <1.5A |
| Operating Temperature | -10°C to +50°C |
| Type | Inverter |
| Frequency | 50Hz |
| Protection | Overload, Over Temperature, Short Circuit |
| Storage Temperature | +70°C |
