Airoha AB1561 - Hold Call; Three-Way Calling

AB1561 Headset Reference Design
User Guide
© 2020 Airoha Technology Corp.
Page 8 of 14
This document contains information that is proprietary to Airoha Technology Corp. (“Airoha”) and/or its licensor(s).
Any unauthorized use, reproduction or disclosure of this document in whole or in part is strictly prohibited.
Functionality Actions Results Requirements
Reject call
Double-tap key1 (Regen)
One long beep and a voice
prompt says “Call rejected”
A call is incoming
2.3.6. Hold call
The user can hold an active call.
Table 17. Hold call
Functionality Actions Results Requirements
Hold call
Double-tap key1 (Regen)
NA
A call is active
2.3.7. Three-way calling
This section shows the functions available to users when two calls are active at the same time.
Note: The calls here are held, incoming, or active.
2.3.7.1. Reject and accept
The user can cancel the currently active call and accept a held or incoming call.
Table 18. Reject and accept
Functionality Actions Results Requirements
Reject and
accept
Tap key5 (PIO4)
One long beep
Another incoming or
active call
2.3.7.2. Hold and reject
The user can keep the current call and reject a held or incoming call.
Table 19. Hold and reject
Functionality Actions Results Requirements
Hold and reject
Press key6 (PIO2) for two seconds
One long beep
Another incoming or
active call
2.3.7.3. Hold and accept
The user can hold the current calling and accept an incoming call.
Table 20. Hold and accept
Functionality Actions Results Requirements
Hold and accept
Tap key7 (PIO3)
One long beep
Another incoming or
active call