Need help?Do you have a question about the AirPro P2501 and is the answer not in the manual?
General| Model | P2501 |
|---|---|
| Oscillation | Yes |
| Speeds | 3 |
| Category | Fan |
| Speed Settings | 3 |
| Material | Plastic |
Important warnings regarding fan mounting to outlet boxes for safety.
Caution against bending fan blade brackets during installation or cleaning.
Crucial step to remove rubber motor stops before installing blades or testing.
List of essential tools needed for fan installation process.
Safety alerts for proper fan mounting to ensure fire, shock, and injury prevention.
Instructions for installing the fan using the standard downrod and ball mount.
Critical warning about the correct installation of the clevis pin for fan security.
Procedure for mounting the fan directly to the ceiling without a downrod.
Guidance for mounting fans on sloped ceilings using specific methods.
Warning on the correct use of the temporary wiring hook for fan assembly.
Warning regarding proper seating of the hanger pipe tab to prevent wiring damage.
Caution against using solid-state speed controls to prevent damage to fan circuitry.
Steps for attaching the canopy using standard ceiling mounting.
Steps for attaching the canopy using close-to-ceiling mounting.
Warning regarding the secure engagement of canopy mounting slots.
Steps to balance fan blades to prevent wobbling and ensure smooth operation.
Safety precautions during fan operation, including blade handling.
Instructions for using the slide switch to control fan direction and speed.
Important safety reminder to turn off power before attempting any fan repairs.
To Next Page
