AirSep FreeStyle Service Manual (English)

Other manuals for AirSep FreeStyle

Service Manual69 pages

Manual562 pages

User Manual42 pages

Instructions For Use3 pages

Questions and Answers:

K
Kenneth WestSep 5, 2025
How to fix AirSep Medical Equipment FreeStyle that does not operate when a pulse flow selection button is pressed?
- D
  Donald GeorgeSep 5, 2025
  If your AirSep Medical Equipment FreeStyle unit does not operate when you press a pulse flow selection button, the battery might be discharged. Try powering the unit through the DC outlet or an AC outlet. If this doesn't resolve the issue, it may indicate a malfunction, and you should contact your Equipment Provider and switch to a reserve oxygen supply.
K
Karen PorterAug 25, 2025
Why is my AirSep Medical Equipment beeping intermittently?
- P
  Patricia SmithAug 25, 2025
  If your AirSep Medical Equipment FreeStyle is alarming intermittently and the yellow BATT light flashes, the battery likely needs charging. Connect it to a DC or AC outlet within 2 minutes, or use the optional AirBelt.
T
thomas77Aug 25, 2025
What to do if AirSep FreeStyle Medical Equipment shuts down with rapid alarm?
- J
  Jeremiah MaldonadoAug 26, 2025
  If your AirSep Medical Equipment FreeStyle is rapidly alarming, the yellow BATT light is flashing, and the unit shuts down, it means the battery voltage is too low. Immediately connect the device to a DC or AC outlet.
R
Robin TorresAug 26, 2025
Why is AirSep FreeStyle alarming intermittently?
- M
  Mark WatsonAug 27, 2025
  If your AirSep Medical Equipment FreeStyle is alarming intermittently and the red light flashes, it indicates your breathing rate exceeds the unit's capacity. Reduce your activity, then turn the unit off and back on to reset it. If needed, switch to another oxygen source and contact your equipment provider.
M
Melissa MerrittAug 27, 2025
Why is AirSep FreeStyle charging slowly?
- A
  aaron36Aug 27, 2025
  If the internal battery of your AirSep Medical Equipment FreeStyle is taking too long to recharge, it might be too hot. You can still use the unit, but charging might not resume until the battery temperature decreases.
D
daughertyebonyAug 28, 2025
What to do if AirSep FreeStyle has a continuous alarm and red light?
- B
  Brian JacksonAug 28, 2025
  If your AirSep FreeStyle has a continuous alarm and the red alarm light is on, it means the device hasn't detected a breath for 15 minutes. Check the cannula connection, make sure the tubing isn't kinked, and ensure the cannula is properly positioned so you are breathing through your nose. If you breathe through your mouth, a chin strap might be needed.
R
Ruth LewisSep 10, 2025
What to do if AirSep Medical Equipment FreeStyle has rapid alarm condition, and the yellow BATT light illuminates intermittently, and FreeStyle shuts down?
- C
  Christopher LambertSep 10, 2025
  If your AirSep Medical Equipment FreeStyle is experiencing a rapid alarm, the yellow BATT light is flashing, and the unit shuts down, it indicates that the battery voltage is too low. Immediately connect the unit to a DC or AC outlet, or use the optional AirBelt.
T
Tony SchneiderSep 6, 2025
What to do if AirSep Medical Equipment FreeStyle has a continuous alarm and the red light illuminates continuously?
- Q
  qgreenSep 7, 2025
  If your AirSep Medical Equipment FreeStyle emits a continuous alarm and the red alarm light stays on, it could be that the device hasn't detected a breath for a while. Check the cannula connection, ensure that the cannula tubing is not kinked, and make sure the cannula is positioned properly so that you are breathing through your nose.
M
mwhiteSep 4, 2025
What causes delay in recharging internal battery of AirSep?
- N
  Nicholas RiveraSep 4, 2025
  A delay in recharging the internal battery of your AirSep unit can occur if the internal battery exceeds its charging temperature. The unit can still be operated, but charging may not resume until the battery temperature decreases.
D
Douglas WoodsSep 2, 2025
What to do if AirSep FreeStyle has an intermittent alarm and yellow light?
- S
  Steven CharlesSep 2, 2025
  If your AirSep FreeStyle has an intermittent alarm and the yellow BATT light flashes, it means the battery needs charging. Connect it to a DC or AC outlet within 2 minutes, or connect to the optional AirBelt.

AirSep FreeStyle Specifications

General

Audible Alarm	Yes
Operating Temperature	41°F to 104°F (5°C to 40°C)
Power	100-240 VAC, 50/60 Hz
Operating Humidity	15% to 95% (non-condensing)
Oxygen Concentration	90% (+5.5% / -3%) at all settings
Weight	4.8 lbs (2.2 kg) with battery

Related product manuals

AirSep FreeStyle Patient Manual

Table of Contents

Other manuals for AirSep FreeStyle

Questions and Answers:

AirSep FreeStyle Specifications

Related product manuals