evenly. Close the compartment door.
In case of electric system failure, there is a
manual override on the electric dump valves
located on each side of the valve. Use a flat
head srew driver or an allen wrench to turn the
override screw clockwise or counter clockwise according to side you access to
open and close the valve. The direction is labeled on the valve.
Macerator Impeller Release Feature
After long periods of non-use, a stuck impeller
can be easily broken loose with a screwdriver
inserted in the motor shaft slot. Remove the
rubber boot, turn the shaft clockwise as shown,
and replace the rubber boot.
Macerator Applications
Empty holding tanks when no dump stations are convenient.•
Transfer waste from holding tank to an auxiliary tank.•
The macerator pump can be used to empty the holding tank into any •
convenient sewer receiver such as a sewer clean-out at your home.
Extended Stays
When you are in a park with a disposal facility, empty the tanks every few
days or whenever they becomes almost full. PUMPING A LARGE VOLUME OF
LIQUID THROUGH THE TANKS AT A TIME WILL HELP KEEP TOILET PAPER
AND OTHER SOLIDS COMPLETELY WASHED AWAY. Remember to empty the
black water tank first and then the gray tank using the gray water to flush the
system.
This practice will avoid the accumulation of solids in the tank, which could lead
Dump Valve
Manual Override
Flat Head Screw
Holding Ta nk
To ilet
Macerator
Pump
Dump Station
or Home Sewer
Cleanout
Aux. Tank
To Next Page
Loading...
