What to do if Airwell AWAU-YDD012-H11 Air Conditioner has AC over current protection?
If your Airwell Air Conditioner experiences AC over current protection, ensure the power voltage is within AC220~240V +/-10%. This issue may arise due to an unstable or too low supply voltage combined with a high load.
Why is my Airwell Air Conditioner compressor overheating?
If your Airwell Air Conditioner's compressor is overheating, it might be due to an EEV connection problem or damage, refrigerant leakage, or poor heat exchange. To address this, confirm that the power breaker operates normally.
What causes overload of system in Airwell Air Conditioner?
If your Airwell Air Conditioner system is overloaded, it is likely due to an abnormal system. Check if the evaporator and condenser are dirty and blocked, as the suggested solution indicates.
Why does my Airwell Air Conditioner show a sync failure?
If your Airwell Air Conditioner is showing a sync failure, it could be caused by abnormal power input voltage, compressor wiring mistake, liquid and gas valves not being open, damaged or improperly working EEV, poor heat exchange, or an overcharged system. Confirm that the power breaker operates normally.
What causes compressor overload protection in Airwell AWAU-YDD012-H11?
If your Airwell Air Conditioner's compressor experiences overload protection, potential causes include an EEV connection problem or damage, refrigerant leakage, or a damaged OLP. The suggested solution is to confirm that the power breaker operates normally.
What to do if Airwell AWAU-YDD012-H11 Air Conditioner has EEPROM problem?
If your Airwell Air Conditioner has an EEPROM problem, replace the indoor main board.
General| Model | AWAU-YDD012-H11 |
|---|---|
| Category | Air Conditioner |
| Brand | Airwell |
| Type | Split System |
| Energy Efficiency Class (Cooling) | A++ |
| Energy Efficiency Class (Heating) | A+ |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
| Outdoor Unit Dimensions (HxWxD) | 550x700x275 mm |
| Cooling Capacity | 3.5 kW |
Describes the HDD/HED series air conditioners and their key characteristics.
Highlights the advanced technological innovations and benefits of the unit.
Details the design and features of the wall-mounted indoor unit.
Explains the microprocessor controller, remote control functions, and additional appendix references.
Lists the components included in the outdoor unit and installation considerations.
Mentions flare type interconnecting tubing and refers to the installation manual for details.
Lists the manuals supplied with each unit for installation and operation.
Presents a table showing compatible indoor and outdoor unit combinations.
Provides detailed technical specifications for the HDD009, HED009 indoor and YDD009 outdoor units.
Provides detailed technical specifications for the HDD012, HED012 indoor and YDD012 outdoor units.
Details the operational limits for cooling and heating based on indoor and outdoor temperatures.
Presents dimensional drawings for the HDD/HED009 and HDD/HED012 indoor units.
Presents dimensional drawings for the YDD009 and YDD012 outdoor units.
Details cooling/heating capacity, correction factors, and performance graphs for HDD/HED009 models.
Details cooling/heating capacity, correction factors, and performance graphs for HDD/HED012 models.
Explains sound pressure level measurement for indoor units and provides a diagram.
Presents sound pressure level spectrum charts for HDD/HED009 and HDD/HED012 indoor units.
Describes sound pressure level measurement for outdoor units and provides a diagram.
Presents sound pressure level spectrum charts for YDD009/YDD012 outdoor units.
Provides electrical data including power supply, max current, circuit breaker, and wiring specifications.
Illustrates the electrical connections for the HDD/HED009/012 indoor units.
Illustrates the electrical connections for the YDD009/012 outdoor units.
Shows the refrigeration circuit for the HDD/HED009 and YDD009 models.
Shows the refrigeration circuit for the HDD/HED012 and YDD012 models.
Details tubing sizes, torque specifications for flare nuts, valve caps, and service port caps.
Covers electronic control concepts, abbreviations, operation, and compressor frequency control.
Explains Fan, Cool, Heat, Auto, and Dry operating modes and their conditions.
Describes Louver, Clean, Sleep, I-Feel functions, and ON/OFF button operation.
Details unit protections, indoor unit indicators, test modes, and sensor characteristics.
Covers precautions, confirmation steps, and diagnostics for electrical and control issues.
Lists error codes (LEDs, 2*7 segments) and their corresponding failures and possible causes.
Provides procedures for checking refrigeration system, mains voltage, power, fan motor, compressor, and reverse valve.
Presents exploded diagrams for HDD/HED009 and HDD/HED012 indoor units.
Provides comprehensive parts lists for HDD/HED009 and HDD/HED012 indoor units.
Presents exploded diagrams for YDD009 and YDD012 outdoor units.
Provides comprehensive parts lists for YDD009 and YDD012 outdoor units.
References the separate Operating and Installation Manuals for HDD/HED009-012 units.
To Next Page