To Next PageTo Next PageWhy is there no feedback from the indoor motor in my Airwell Air Conditioner?
If you're experiencing no feedback from the indoor motor of your Airwell Air Conditioner, it could be due to the following reasons: * The IFAN motor is damaged. * The IFAN motor is blocked. * There's an issue with the IDU PCB.
What causes zero-crossing protection in my Airwell AWAU-YGF024-H11 (IDU)?
Zero-crossing protection activation in your Airwell Air Conditioner (IDU) can occur because: * The IFAN motor is damaged. * The zero-crossing circuit on the IDU PCB is damaged.
What causes malfunction protection of jumper cap in Airwell AWAU-YGF024-H11?
Malfunction protection of the jumper cap in your Airwell Air Conditioner is caused by a poor connection of the jumper on the indoor PCB.
General| Model | AWAU-YGF024-H11 |
|---|---|
| Category | Air Conditioner |
| Energy Efficiency Ratio (EER) | 3.21 |
| Refrigerant | R410A |
| Type | Split System |
| Cooling Capacity | 24000 BTU |
| Power Supply | 220-240V, 50Hz |
Key technological innovations and benefits of the unit.
Technical specifications for HGF009/HHF009/YGF009 models.
Technical specifications for HGF012/HHF012/YGF012 models.
Technical specifications for HGF018/HHF018/YGF018 models.
Technical specifications for HGF024/HHF024/YGF024 models.
Defines the operating limits for cooling and heating modes.
Cooling capacity data for HGF009/HHF009/YGF009 models.
Heating capacity data for HGF009/HHF009/YGF009 models.
Cooling capacity data for HGF012/HHF012/YGF012 models.
Heating capacity data for HGF012/HHF012/YGF012 models.
Cooling capacity data for HGF018/HHF018/YGF018 models.
Heating capacity data for HGF018/HHF018/YGF018 models.
Cooling capacity data for HGF024/HHF024/YGF024 models.
Heating capacity data for HGF024/HHF024/YGF024 models.
Indoor sound pressure level measurement and spectra.
Outdoor sound pressure level measurement and spectra.
Electrical specifications for outdoor units by model.
Troubleshooting for electrical and control system issues.
Safety precautions for inspection and maintenance.
