Need help?Do you have a question about the Airwell DLS 18 DCI and is the answer not in the manual?
Technical specifications for the DLS 18 DCI model, including indoor and outdoor unit details.
Technical specifications for the DLS 24 DCI model, covering indoor and outdoor unit details.
Technical specifications for the DLS 30 DCI model, detailing indoor and outdoor unit parameters.
Technical specifications for the DLS 36 DCI 1PH model, including indoor and outdoor unit data.
Technical specifications for the DLS 36 DCI 3PH model, detailing indoor and outdoor unit data.
Technical specifications for the DLS 43 DCI 3PH model, covering indoor and outdoor unit details.
Technical specifications for the DLS 43 DCI 1 PH model, including indoor and outdoor unit data.
Presents performance data and cooling capacity for the DLS 18 DCI - H11 model.
Detailed cooling capacity table for DLS 18 DCI at various temperature conditions.
Heating capacity table for DLS 18 DCI at different temperature conditions.
Cooling pressure curves for DLS 18 DCI in technician mode.
Heating pressure curves for DLS 18 DCI in technician mode.
Performance data and cooling capacity for DLS 24 DCI - H11 model.
Cooling capacity table for DLS 24 DCI at various temperature conditions.
Heating capacity table for DLS 24 DCI at different temperature conditions.
Cooling pressure curves for DLS 24 DCI in technician mode.
Heating pressure curves for DLS 24 DCI in technician mode.
Performance data and cooling capacity for DLS 30 DCI - H11 model.
Cooling capacity table for DLS 30 DCI at various temperature conditions.
Heating capacity table for DLS 30 DCI at different temperature conditions.
Cooling pressure curves for DLS 30 DCI in technician mode.
Heating pressure curves for DLS 30 DCI in technician mode.
Performance data and cooling capacity for DLS 36 DCI - H11 model.
Cooling capacity table for DLS 36 DCI at various temperature conditions.
Heating capacity table for DLS 36 DCI at different temperature conditions.
Cooling pressure curves for DLS 36 DCI in technician mode.
Heating pressure curves for DLS 36 DCI in technician mode.
Performance data and cooling capacity for DLS 36 DCI - H13 model.
Cooling capacity table for DLS 36 DCI - H13 at various temperatures.
Heating capacity table for DLS 36 DCI - H13 at different temperatures.
Cooling pressure curves for DLS 36 DCI - H13 in technician mode.
Heating pressure curves for DLS 36 DCI - H13 in technician mode.
Performance data and cooling capacity for DLS 43 DCI - H11 model.
Cooling capacity table for DLS 43 DCI - H11 at various temperatures.
Heating capacity table for DLS 43 DCI - H11 at different temperatures.
Cooling pressure curves for DLS 43 DCI - H11 in technician mode.
Heating pressure curves for DLS 43 DCI - H11 in technician mode.
Performance data and cooling capacity for DLS 43 DCI - H13 model.
Cooling capacity table for DLS 43 DCI - H13 at various temperatures.
Heating capacity table for DLS 43 DCI - H13 at different temperatures.
Cooling pressure curves for DLS 43 DCI - H13 in technician mode.
Heating pressure curves for DLS 43 DCI - H13 in technician mode.
Electrical data for single-phase DLS 18, 24, and 30 indoor units.
Electrical data for single-phase DLS 36 and 43 indoor units.
Details the control features for the compressor, drive, and fan.
Rules governing EEV control for optimal system performance.
General rules for controlling outdoor fan speed based on heat exchanger temperature.
Details protections related to thermodynamic conditions and cut-off.
Details high/low pressure protection mechanisms and fault codes.
Rules for entering, navigating, and exiting the Technician Peripheral Test (TPT).
Important safety precautions and notices related to electrical assembly.
Warning about high voltage in electrical assemblies and safety measures.
Safety advice regarding charged capacitors after power off.
Lists common indoor unit failures and their corrective actions.
Lists common outdoor unit failures and their corrective actions.
Troubleshooting steps for insufficient cooling capacity.
Troubleshooting steps for insufficient heating capacity.
Troubleshooting steps for an overheating compressor.
Explains the coding method for outdoor unit faults and LED indicators.
Details diagnostic codes for outdoor units and their corrective actions.
Explains how to view indoor unit fault codes via the indoor unit display.
Procedure for checking main components like DC voltage, mains voltage, line filter, and driver.
Procedure for checking the High Pressure Switch (HPS).
Procedure for checking the Low Pressure Switch (LPS).
Procedure for removing the compressor, including refrigerant handling.
To Next Page
General
