Airxcel Marvair ComPac II Series User Manual (English)

Questions and Answers:

M
Michelle GallegosAug 3, 2025
Why does my Airxcel Air Conditioner run continuously but the cooling is insufficient?
- S
  Steven PerezAug 3, 2025
  If your Airxcel Air Conditioner runs for long periods or continuously without sufficient cooling, consider the following causes: * Dirty filter or reduced airflow: Inspect the air filters and blower operation. Remove any airflow restrictions. * Low refrigerant: Check for proper refrigerant charge and potential leaks. * Component failure: Check internal components, especially the compressor, for proper operation. * Undersized unit: If the unit is too small for the space, adding additional units may provide greater capacity.
V
Veronica ParkerAug 13, 2025
Why is there water on the floor near my Airxcel Air Conditioner?
- F
  fdudleyAug 13, 2025
  If you find water on the floor near your Airxcel Air Conditioner, it could be due to: * Obstruction in the condensate line: Check for any clogs or restrictions. * Obstruction or leak in the condensate pan: Inspect the pan for leaks or blockages. * The unit not being level: Ensure the unit is properly leveled.
S
shawnarodgersAug 25, 2025
What to do if my Airxcel Air Conditioner has no or reduced space heating?
- C
  Christine ThompsonAug 25, 2025
  If your Airxcel Air Conditioner (equipped with resistance elements) provides no or reduced heating, consider these potential issues: * Defective heating element(s): Check the resistance element(s) for continuity. * Thermal limit open: Check continuity across the thermal limit switch. * Defective heater relay: Check the relay for proper operation and replace it if defective. * Open thermal cut-out (TCO): Check across the TCO (adjacent to the element(s)) for continuity. It should normally be closed.