Airzone EASYZONE - System Elements; Innobus Pro6 Main Control Board (AZCE6 IBPRO6); Technical Specs

27
ES
EN
FR
IT
PT
DE
SYSTEM ELEMENTS
INNOBUS PRO6 MAIN CONTROL BOARD (AZCE6IBPRO6)
Electronic board that controls the system through wired and wireless devices. Wall mounted.
Functionalities:
• Control and management of the thermostats (up to 6 zones).
• Power outlets for motorised elements.
• Remote zone on/off module (up to 6 zones).
• Only heat module, restricting the available modes to Stop, Heating and
Ventilation.
• Relay outlet configurable as CMV (Controlled Mechanical Ventilation) or
boiler.
• Control gateway management.
• Communication with units of integral control of the installation.
• Communications with other external control systems through integration bus.
Technical specs
Power supply and consumption
Airzone connection bus
Type of power supply
Vac
Nº of ports
3
V max
110 / 230 V
Shielded twisted pair
2 x 0,22 + 2x0,5 mm
2
I max
250 mA
V max
12 V
Frequency
60/50 Hz
Automation bus
Stand-by consumption
400 mW
Nº of ports
1
Maximum consumption
25 W
Shielded twisted pair
2 x 0,22 + 2x0,5 mm
2
Module over-current protection
250 mA Communications protocol
MODBUS RS-485
Par – 19200 bps
Communications via radio
Actuator outputs
Communications protocol
Airzone
Nº of outputs
6
Frequency 868 MHz
Maximum number of outputs per
damper
2
Radiation power
5 dBm
Vmax
± 12 V
Maximum distance in open space
40 m
Imax
150 mA
Operating
temperatures
Relay outputs
Storage
-20 … 70 ºC
Nº of relays
2
Operation
0 … 50ºC
V max
24 / 48 V
Mechanical aspects
I max
I max
Protection class
IP 20
Weight
616 g
Dimensions (WxHxD)
195x180x55,5 mm
Type
Airzone Central V1.3
Licence
215562
Application
Variable air volume system (without h/c coil)
Heating
Cooling
Control accuracy (K)
0.3
0.3